THE DAVENPORT HPThe Davenport HP machine is the machine of choice for hundreds of customers worldwide who require increased productivity in small parts manufacturing. Davenport HP owners can now meet digital-age, global production level demands with the speed, accuracy and flexibility of the Davenport HP machine.
The Davenport HP is the ideal machine for long or short runs of small parts. A powerful PLC controller means reduced set-up times and adjustments and allows for operators to concentrate more on producing parts rather than fine-tuning adjustments.
Machine Features:- High Precision HP Head standard equipment
- Faster return on investment due to low machine cost
- Fastest cycle times with 0.3 seconds index and programmable index points
- More up-time, less maintenance parts
- Easy set-up with full enclosure front and back sliding doors
- Spindle speeds infinitely variable from 0-3800 RPM
- Servo Threading attachment standard
- Simple Servo motion control has up to 6 axes of control and stores 100 job summaries on board with the ability to import/export to USB memory card
- Operator training reduced to a matter of days
- Optional web server provides remote machine monitoring
- Optional Servo Burring and 2-Position Back Working attachments eliminate many secondary operations
Features:- The Davenport HP operates with a simple PLC based control and multiple Servo drive systems that eliminate over 150 parts from the original, mechanical Model B machine. The results are reduced set-up times and higher production rates.
- Up to 6 axes of control
- Stores 100 job summaries on board with ability to import/export to USB memory card
- Easy to learn
- Optional web server for remote monitoring
Specifications for the Davenport HP machine
Bar capacity (maximum)
0.875 inch (22.2 mm) round
0.750 inch (19.1 mm) hex
0.625 inch (15.9 mm) square
Bar capacity (minimum)
0.187 inch (4.8 mm)
Turning length (maximum)
3.0 inches (76.2 mm)
Stock depletion sensor
yes
Burring spindle sensing mechanism
yes
Number of main (work) spindles
5
Main spindle speed range
0-3,800 rpm
Number of independent longitudinal tool stations
5
Cross slides
2
Tool arms
2
Spindle pick-off and deburring
Yes
Spindle capacity diameter pick-off (maximum)
0.875 inch (22.2 mm)
Number of tools servicing pick-off spindle
1 (2 with Two Position Backworking Option)
Tooling positions
9 (plus attachments)
Spindle indexing time
0.3 seconds minimum variable
Control make and model
Davenport Controller
Shop Air Pressure
90 psi (Option Dependant) ( up to 20 cfm)
Total power requirement
24,000 Watts
Clear area required for installation
20’L(609.6cm) x 15’W(457.2cm) x 10’H(304.8cm)
Weight & Length Information
Machine weight - 6,100#
9’4”L(284.48cm) x 4’6”W(137.16cm) x 8’10”H(269.24cm)
Cucchi Bar Loader weight - 4,000#
18’L(548.64cm) x 2’9”W(83.82cm) x 4’1”H(124.46cm)
Stock Carrier Cover weight - 250#
8’6”L(259.08cm) x 19”W(48.26cm) x 21”H(53.34cm)
Stock Carrier weight - 225#
10’4”L(314.96cm) x 11-1/2”W(29.21cm) x 11-/2”H(29.21cm)
Transformer (if required) weight - 325#
16”L(40.64cm) x 28”W(71.12cm) x 32”H(81.28 cm)
Controls Package - 1200#
60”L(152.4cm) x 60”W(152.4cm) x 60”H(152.4cm)
Constant Low Pressure Lubricator #SB-2446-1
(Ways and Servo Motors)
Required Lubricant
Mobil Vactra (Heavy)
Reservoir Capacity
8 Liters
Lube Pump Output
100 cc/min.
Pressure Setting
25-30 psi
System Voltage
480 V, 50/60Hz 3 Phase, 50 Amp
|
